W.E.ST. POS-124PDP kontroller for posisjonering

W.E.ST. kontrollere for posisjonering 
  • Two independent positioning axes
  • Can be combined for synchronization controls
  • Required position parameter, actual value response, on loop control byte and status byte via the Profibus DP
  • Stroke dependent deceleration or NC saturating servo-mechanism
  • Analogue actual value registration
  • Superimposed synchronization actuator as PT1 actuator
  • Usable with zero lapped control valves
  • Application –oriented parameterization
  • Fault diagnosis and extended function checking
  • Simplified parameterization with WPC-300 software version 3.2
    
Kontakt Hydex vedrørende W.E.ST. POS-124PDP kontroller for posisjonering 

Type    Two axes positioning unit
Use Controlling hydraulic positioning drives
Power supply 24 VDC (±10%)
Current consumption 200 mA 
External fuse 1 A (medium time lag)
Interface RS 232C, 9600… 57600 Baud, 1 stop bit, No parity, Echo Mode
Housing Snap-On Module EN 50022
Polyamide PA 6.6
Combustibility class V0 (UL94)
Protection class IP20
Temperature range -10°C to +50°C
Humidity <95% (not condensing)
Connectors RS232: 3,5mm JISC-6560
4 x 4pol. screw terminals
PE: direct via DIN rail
For mer informasjon Klikk her  --- Datablad

Kontakt Hydex vedrørende W.E.ST. POS-124PDP kontroller for posisjonering


 
Page rendered: 30.12.2022 01:05:26
OXX.Authorization.User.Username: Hydex_Systemhydraulikk_anonym (NO)